Ask for current stock, real machine video, specs, weight, transport size, hydraulic test and export support before quotation.
Komatsu PC360-7 is the older PC360 version I show when buyers need a lower-budget heavy Komatsu excavator for quarry loading, sand and gravel yards, short-term heavy work and simple repair markets. We usually keep around five PC360-7 machines in stock, often around 2,000 to 8,000 hours. PC360-8 can be checked for stricter import rules and longer-term rental use.
Komatsu PC360-7 is not the machine I recommend for every heavy job. It is better for buyers who want a lower purchase cost, direct-injection repair logic, stronger tolerance for basic repair markets and a machine for rougher loading work without moving into the higher cost level of PC360-8.
We usually keep around five PC360-7 machines in stock. Current machines may range from about 2,000 to 8,000 working hours. Paint condition can vary: some machines keep original paint, some are fully repainted, and some only have small local paint repair. When current yard stock changes, we can also check suitable China-market PC360-7 options according to the buyer’s required year, hours and condition.
PC360-7 commonly uses the SAA6D114E direct-injection engine, but the actual engine plate must be confirmed on each machine. This older direct-injection setup is usually easier for markets with unstable fuel quality and limited electronic repair support. It is also easier for local mechanics who prefer older Komatsu machines and do not want complicated electronic diagnosis.
PC360-7 should not be confused with PC350-7. PC350-7 is easier for narrower sites, trenching, narrow mountain access and lighter general work. PC360-7 should be checked when the buyer needs heavier undercarriage support, stronger loading confidence and a machine mainly for quarry, sand yard or repeated truck loading work.
I do not recommend PC360-7 for buyers who need stricter import acceptance, lower fuel use, smoother combined movement, cleaner resale image or long-term heavy-duty rental. In those cases, PC360-8 should be checked separately. PC360-7 is mainly for lower-budget heavy work, short project cycles and markets where simple repair matters more.
Before quotation, ask for the exact working video. Check cold start, smoke, hydraulic response after warming up, swing, travel, undercarriage, boom foot, arm, bucket linkage, welding marks, machine plate and loading proof. A lower price is not a good deal if the hydraulic system, structure or undercarriage is tired.
Final Komatsu PC360-7 specs should follow the current machine, machine plate and actual configuration. PC360-7 weight, bucket size, track shoe width, transport size, boom and arm setup may vary by machine condition and export preparation.
For Komatsu PC360-7 specs, PC360-7 weight or PC360-7 engine details, the actual machine should be confirmed by video, plate details and photos.
| Specification Item | What to Confirm |
| Model Version | Confirm PC360-7 / PC360LC-7 by real machine plate |
| Operating Weight | Confirm by bucket, boom, arm, counterweight and track shoes |
| Engine | Common reference is SAA6D114E; confirm actual engine plate, cold start, smoke, idle stability and leakage |
| Hydraulic System | Test boom, arm, bucket, swing, pump response and hot-machine movement |
| Swing System | Check swing noise, looseness, brake response and swing area |
| Travel System | Check straight travel, turning strength and final drive area |
| Undercarriage | Check chain, rollers, sprocket, idler, shoes, track frame and adjuster |
| Structure | Check boom foot, arm, bucket linkage, weld marks and pin looseness |
| Transport Size | Confirm width, height, loading method and destination limits |
PC360-7 is usually easier for buyers who need a heavy Komatsu excavator but want to control purchase cost. It is suitable for quarry loading, sand and gravel yards, short-term heavy work and markets where simple repair is more important than newer machine systems.
PC360-7 is more suitable for countries where local mechanics prefer older Komatsu machines and basic mechanical repair. It has less electronic repair pressure than PC360-8, which can reduce risk for remote job sites and basic workshops.
PC350-7 is easier for narrower sites, trenching and lighter general work. PC360-7 should be checked when the job needs heavier loading confidence, wider undercarriage support and stronger stability for quarry or yard work.
PC360-7 is usually easier to accept in areas with unstable diesel quality. The older direct-injection engine setup is not as sensitive as newer common-rail systems, but cold start, smoke, blow-by, leakage and engine sound still must be checked carefully.
PC360-7 is not the best choice for every buyer. If the buyer wants Tier3 acceptance, lower fuel use, smoother combined movement, better long-term rental value or cleaner resale image, PC360-8 should be compared separately.
Photos are not enough. For Komatsu PC360-7, we suggest checking the exact working video before quotation.
Why Did a Kenyan Customer Choose Anhui Gangya Construction Machinery Sales Co., Ltd. After a Week of Comparing Suppliers? From concerns
Why Did a Kenyan Customer Choose Anhui Gangya Construction Machinery Sales Co., Ltd. After a Week of Comparing Suppliers? From concerns
